| |
|
|
Vertical
Home Lifts
EMI-72
|
|
NOTE: Tower is reversible
from side to side
EMI-72 platform lifting height is 72"
maximum
All lift options available with this unit.
Call Send switches included with EMI-72 only. |
|
|
Description
of Product
The product described
herein, is a precision verfical platform
lifting device consisting of a machine tower with
lifting platform, selected and dimensioned to
provide adequate lifting height to suit the
residential building requirement. The lift can be
used indoors and outdoors to vertically transport
a wheelchair user or otherwise mobility-impaired
person, up and over a low-rise barrier created by
stairs, thus creating access to or within the
building.
The lift when configured with appropriate options
can meet the ANSI Al 7.1 Part XX, Section 2100
codes, as it relates to residential applications.
Quality Assurance
Manufacturing:
A company with not less the
thirty five ( 38 ) years of experience in the
design, fabrication and installation of
specialized lifting equipment for handicapped and
geriatric consumers should supply the lift.
Performance Requirements:
The
unit shall be assembled and pre-wired (less
optional equipment and necessary gates) and
manufactured with adequate lifting and load
capacity for application described elsewhere in
this specification.
The unit shall be easy to operate by the user or
attendant and shall be capable of functioning in
all weather conditions.
The unit shall have the capacity to lift up to 500
lbs. to the desired lifting height up to a maximum
lift height of six ( 6 ) feet.
Composition of Materials:
Machine tower: 14 gauge cold
rolled steel.
Base frame: 1 1/2" square x 3/16"
Structural steel tubing.
Lift weldment: 1 1/2" x 3" x .188"
wall structure steel tubing.
Tower cap: 10 gauge cold rolled steel plate
Side Guard Rails: 1" round x .120" gauge
steel tubing (frame).
Platform: 14 gauge cold rolled steel plate with
slip resistance surface.
Access ramp: 11 gauge steel plate with slip
resistance surface.
Electrical box: 16 gauge galvanized steel
Switch box: Hi-impact A.B.S. Thermoplastic
instrument case.
Lirnitations: Vertical platform lift shall operate
both indoors and out, and must be anchored on a
level, 4" thick, 3500 psi reinforced concrete
surface or pad.
Electrical System
Wiring:
The unit shall be pre-wired by
manufacturer with exterior grade thermoplastic
coated wiring. Extension Cord, 14 gauge UL-CSA
approved is recommended if power source is not
within three (3) feet of Machine tower. Machine
may also be wired using water proof conduct.
Powder Coat Finish
Prep, Primer, & Powder Coat Process
1. 3 Stage wash, soapy water,
clear water, and Iron Phosphate which is
applied to parts.
2. Parts are inspected and scuffed
3. Epoxy Primer is applied
4. Parts are baked at 250 degrees for 15
minutes
5. Parts are inspected and scuffed if needed
6. Huebert O'Brian Powder-TCIC Polyester
7. Mixed with Paint, Color Almond PFT-500-SS
8. Powder Coat is applied and baked at 400
degrees for 30 min.
9. Parts are inspected and scuffed if needed
Safety Devices
The unit shall have the
following safety features for protection
of users and the general public:
· Upper and lower limit switches
· Instant Reverse Motor
· Powered with 110 volt AC current, by 1/2 HP
motor, 6.4 Amp
· Grounded electrical system
· Heavy duty worm drive gear box with heavy
duty #50 lifting chain
· Automatic access ramp
· 36" guard rails on non-enter and exit
sides of platform
· Non-Skid platform and access ramp surface
· Key-lock control
· Switching & Control system 24 VAC low
voltage current
Installation
The contractor shall do all
work and supply all materials necessary for the
complete installation, It is the intent of this
specification to outline broadly the equipment
required but not to cover the details of design
and construction.
Maintenance
Maintenance of the vertical
platform lift unit shall consist of regular
cleaning of the unit, protection of the painted
surface of the unit.
Warranty
Unit shall have one ( 1 )
year limited warranty on the basic unit and
electrical system with a two (2) year warranty
of drive train components.
Note:
This specification has been written to
assist you and your consumer in preparing an
accurate and detailed description for specifying
a vertical platform lift. All or part of this
specification may be reproduced. Additional
technical information is available from our
Product Engineering Department.
|
|
|
|
|
The Residential Lifts are one tough,
safe, affordable lift.
Compare it against the competition.
We'll save you as much as 30% and more.
The Lift is fully warranted for one year.
More Lift Info
|
|
|
